|
Wireless
Budget System |
|
|
|
Wireless system 963
Features
Range: Up To 1500ft
Line-of-sight
(Expandable)
Power required 12 VDC ( Solar
Ready)
IP65 Fiber Weatherproof Enclosures 9x9x4 inches
Factory configured, Ready-To-Operate
License Free Radio Operation 433MHz, ISM Band
Description
The 943381 transmitters
and receivers
is designed for multiple
wireless remote-control
applications.
When triggered with an
external dry-contact
such as float switch, Pressure
sw, timer sw. etc,
the Transmitter
will send a digital
encoded signal to its
companion control
Receiver.
The receiver will verify
the digital code and
then activate its relay
output.
Applications:
Industrial Monitoring, Pump
control, Lighting controls,
Monitor remote instruments,
Gates, Irrigation, sensors and detectors,
Generators, Packing and mobile
system,
Factory process control, Alarms, Flood control,
Wire replacement
Product made in USA
|
|
|
|
1Ch
963
|
Single Channel Wireless Control:
Transmitter, Receiver, migro7 antenna
|
|
|
|
2Ch
963 |
TWO Channel Wireless Control:
Transmitter, Receiver, migro7
antenna
|
|
Wireless System,
General Specifications
Radio Frequency:
433 MHz
Regulatory:
FCC Part 15 (No license
required)
Control Channels:
1 Circuit per channel
Transmitter/Receiver Code Matching: Factory
set
Antenna Connection: RP-SMA
Enclosure Weatherproof,
Size: 9x9x4 inches
Transmit/Receive Range
(with 7 inch Omni antennas):
Line-of-sight 1500ft
Expandable to 3 Miles
with 938432 Yagi antenna
Operating Temperature:
-22 to 113 ºF (-30 to 45
ºC)
Enclosures:
IP 65 Fiber
Weatherproof
Antennas:
3dBi, Omni 7 inch w 5 ft
coax (Included)
Transmitter
Specifications
Control: each Input
Type: TWO
wires (Dry-contact)
RF Power Output:
1000mW
RF Data Rate:
250 kbps
RF Output Impedance:
50 Ohm nominal
Operating Power: 12 VDC @ 5W max
TWO Wires
Receiver Specifications
Receive Sensitivity:
-100 dBm
RF Input Impedance:
50 Ohm nominal
Operating Power:
12 VDC @ 3W max
TWO Wires
Control Output: Relay Contact 5Amp
30V/240V,SPDT Class 2
Pilot duty
Regulatory Compliance: FCC Part 15 (No license
required)
|
 |
Omni 433 MHz, Gain: 3 dBi Rating:
30 Watts
7 inch, Impedance 50 ohms
w 5 feet coax and SMA
terminal
( TWO Included
with the system ) |
Optional Extended range
Yagi antenna 3Km line of sight
433 MHz,
3E, Gain: 7 dBi Rating:
100Watts
Impedance 50 ohms,
N terminal with 12 ft Coax cable
Vertical beam 45 degrees. Horizontal beam 60 degrees
Base Length: 18", Weight:
1.4lb
With 10ft Coax cable and RF connector
TWO Antennas required; Transmitter &
Receiver
|
|
|
WARNING
:
Radio
control equipment is not to be used in life safety.
DISCLAIMER
Radio control systems are subject to applications,
environmental and atmospheric conditions,
We are not liable of failures on miss applications,
radio black outs or interruption of the transmissions.
Radio Installations shall be performed by a certified
professional.
|
|
|
