long range radios


  Long range radio control
Unlimited applications,  Long range control
Two (2) channel wireless control system


971240       Please Request a Quotation
 




 
Mounted in plastic, NEMA 4X enclosures, the 931240 system is designed for outdoor/indoor
industrial wireless controls applications. The transmitter has an output power of 2 watts @ 26.995 MHz.
The potential range is approximately 2 miles* and, with proper antenna, is not limited to line of sight.

  Additional  Receiver  971241,    Additional  Transmitter  971242,


 

.

   2 Miles ( 3 km )  
  
  Optional extended range up to 20 Miles (32Km)

 
 

  Specifications
Operating Voltage: 12VDC/ 110-220VAC
Operating Temperature: -4 to +140 F (-20 to +60 C)
Number of Codes: 64000 codes, factory preset 16 BIT Digital
Compliance: FCC CFR part 15.247, 95 sub E
Transmission Power per FCC Part 15.249,  50mV/m @ 3m
Carrier Frequency 27 MHz, industrial band Free
Current Transmitter Standby 0.1mA, transmitting 200mA 
Current  Receiver Standby 70 mA, operation, 150mA
Data Input TX  Dry contact   N/O
Relay Output 6 Amp max, 30V max  Class 2 pilot duty
Antenna Impedance 50 Ohms  
Power Output 2 Watt RF
Weight 18 lb. (9.4 Kg) each
Enclosure NEMA4 IP65 Fiber , wall or pole mount
  
 Operation each channel  Transmitter    :    Receiver
Continuous: Close switch:    Turn ON,  
Open switch:     Turn OFF 

 

  Transmitter & Receiver easy to install components:  # 971240

1  Base Transmitter dry contact input  
1  Base Receiver pre-wired,  relay output 10A, pilot duty
2  Antennas 42 inch Base Omni 5 dBi with PL259 connector
2  NEMA 4  IP65 Fiber Enclosure for wall or pole mount
    Instructions, installation & wiring diagram, 

 

    

 

     

DISCLAIMER:  Contact a licensed professional for your project.  \ Radio control equipment in not to be used in life safety.

     Copyright   Electrodepot. All rights reserved