wireless DIN


  Industrial radio control

Industrial Wireless Radio Controls 

Transmitter & Receiver   948432

  Performance
2 miles ( 3 km) line-of-sight w Yagi antenna
Operation:  120/240VAC or 12VDC
Transmitter input N/O Dry contact
Relay Output SPDT, 6A Class 2 pilot duty
Heavy Duty NEMA4, IP65 UL Fiber enclosure
License free 430 - 450MHz Industrial ISM band
Factory configured systems, Ready to operate
No setup or programming required

Specifications
 
.
 Operation   Transmitter Receiver
 Continuous Close switch Ch 1
Close switch Ch 2
Close switch Ch 3
Close switch Ch 4
Relay 1  ON
Relay 2  ON
Relay 3  ON
Relay 4  ON

   Specifications      Digital Transmitter
Supply power 120/240VAC or 12VDC /  5watt 
Inputs  N/O Normally Open, digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded   Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Input Wiring Din Terminals,  Dry Contact
Response Loop 500 msec
Weight 12 lb (5.40kg)  each unit
Dimensions * 10"W x 8"H x 4"D (254 x 200 x 100 mm) * may vary

   Specifications      Digital Receiver 
Supply power 120/240VAC or 12VDC /  5watt 
Output   Relay 6Amp, Class 2 pilot duty
Frequency 433 MHz  • License free Industrial ISM band
Configuration DIP switch factory preset
Compliance FCC CFR part 15.247, 95 sub E
Wiring Screw Terminals
Antenna Z 50 Ohm SMA RF connector
Ambient temp  14 to 140 F (-10 to 60 C)
Enclosure  NEMA4, IP65 Fiber UL listed

 

       4  Independent  Control Channels
 
Applications:
Industrial Monitoring, Pump control, Monitor remote instruments, sensors,
Lighting control, Packing and mobile system, PLC remote, SCADA,
Factory process control,  Alarms, Generators
Solar,  Wire replacement.

  948432  System with   2 Mile Antenna
  948434  System with   4 Mile Amp & Antenna  
  948439  System with  10 Mile Amp & Antenna

Request a Quotation

Package include:  One  Base Transmitter, One  Base Receiver 
Two Antennas with 10ft coaxial cable, NEMA 4 Fiber enclosures & Instructions
    
      Antenna Specification
938432  -  2 Mile+
3 Element Beam Yagi Antenna
433 MHz, Gain: 7 dBi, 150 Watts
Impedance 50 ohms N terminal
Vertical 45 deg, Horizontal 60 deg

with 10 ft coax cable and connector
938455  -  4 Mile+
5 Element Beam  Yagi Antenna 
433 MHz, Gain: 9 dBi, 150 Watts
Impedance 50 ohms  N terminal
Vertical 55 deg, Horizontal 60 deg
with 10 ft coax cable and connector

938434  -  10 Mile+
12 Element Beam Yagi Antenna
433 MHz, Gain: 14 dBi, 150 Watts
Impedance 50 ohms N terminal
Vertical  42 deg, Horizontal 45 deg
with 10 ft coax cable and connector

 
  Transmitter 4 Channel   Receiver 4 Channel

 

 

 

DISCLAIMER:  Radio control equipment in not to be used in life safety.   Radio Installations shall be performed by a certified professional.

     Copyright   Electrodepot. All rights reserved